Hỗ trợ trực tuyến

Hỗ trợ trực tuyến

An Toàn, PCCC
Skype Me!
0908.994504
Điện - Viễn Thông
Skype Me!
Tel: 0906 31 64 66
Kỹ thuật
Skype Me!
Đối tác
 Hand Held Active Aligment Splicer - S153A
Hand Held Active Aligment Splicer - S153A
Key features:
• Active V-groove, More Reliable than conventional Fixed V-groove
machines
• Rugged and compact hand held design for demanding environmental
conditions
• Fast splice (9 sec) at super low loss and Fast Heating (25 sec)*1
• 200 cycles (Splicing & Heating) with Fitel series battery configuration*2
• Available for All METRO/LAN/FTTx fibers including ultra bend-insensitive
fibers (e.g. EZ-BendTM)
• Splicer is compatible with the Seikoh Giken and Diamond Spliceon-
connector (SOC)
• Easy maintenance - Toolless electrode replacement/mirror free alignment
system
• Easy Software upgrade via the Internet
• Easily exchanged fiber holder systems (tight holder/fiber holder/SOC holder)
• PC interface software to allow user manage splicing programs and results
• Auto-start shrink sleeve oven feature
• Improved GUI to further enhance ease-of-use
• Large memory for storing data (2,000 splice data) and image (100
images)
Giá: vui lòng liên hệ
  • Thông tin chi tiết

    •  

    SPECIFICATIONS

     

    Applicable Fibers

    SM (ITU-T G.652), MM (ITU-T G.651), DSF (ITU-T G.653), NZD (ITU-T G.655), BIF/UBIF (Bend insensitive fiber, ITU-T G.657)

    Cladding Diameter

    80~150 μm

    Coating Diameter

    160~900 μm

    Fibers Cleave Length

    5~16 mm

    Average Splice Loss

    SM: 0.04 dB, MM: 0.02 dB, DSF: 0.06 dB, NZD: 0.06 dB

    Splice Time

    9 seconds (semi-auto mode)

    11 seconds (regular mode)

    Heat Time

    25 seconds (S922: 40mm Sleeve, S921: 60mm Sleeve) (Pre-heat mode)

    31 seconds (S922: 40mm Sleeve, S921: 60mm Sleeve) (regular mode)

    Splice Programs

    Max. 150

    Heat Programs

    Max. 18

    Automatic Heating Start

    Available

    Applicable Sleeves

    20/40/60 mm

    Fiber Holding

    Tight holder (Loose tube applicable) or Fiber Holder System

    Tension Test

    1.96N

    Fiber Image Magnification

    76X, 235X

    Splice Memory

    Max. 2,000

    Image capture Capacity

    Last 100 images to be automatically captured + Up to 24 images to be stored permanently

    Dimension

    127W × 199D × 105H mm (not including shock absorber)

    159W × 231D × 130H mm (including shock absorber)

    Weight

    1.7 kg (without battery)

    2.1 kg (with two batteries)

    Monitor

    3.5” color LCD monitor

    Data Output

    USB ver.2.0 mini

    Diaplaying Language

    20 languages (e.g. English, Spanish, Japanese, Chinese)

    Battery Capacity

    Typical 80 splice/heat cycles with single battery*6

    Typical 200 splice/heat cycles with 2 batteries*7

    Altitude

    5,000 mh

    Operating Temperature

    -10 to +50 °C (without excessive humidity)

    Storage Temperature

    -40 to +60 °C (without excessive humidity)

    Power Source

    AC Input 100 to 240 V (50/60 Hz), DC Input 11 to 17 V

    *6 The number of the splicing and heating the machine can produce using a fully charged brand new battery at room temperature of 20 °C,

    semi-auto mode for splicing and regular mode for Heating. Depending on the condition of the batteries and operation environment, the number can vary.

    *7 The number of the splicing and heating the machine can produce using 2 fully charged brand new batteries at room temperature of 20 °C.

    Depending on the condition of the batteries and operation environment, the number can vary.