Hỗ trợ trực tuyến

Hỗ trợ trực tuyến

An Toàn, PCCC
Skype Me!
Điện - Viễn Thông
Skype Me!
Tel: 0906 31 64 66
Kỹ thuật
Skype Me!
Đối tác

For use in the following Application Markets:

  • Telecommunication battery testing and analyis
  • UPS battery testing and analysis
  • Power Utility battery testing and analysis
  • CATV/Broadband battery testing and analysis

NERC Compliance:

Midtronics battery testers, analyzers and battery data management software make compliance with the new NERC standard PRC-005-2 quick and easy.

Giá: vui lòng liên hệ
  • Thông tin chi tiết
  • Model Number: CMA-7000

    Applications: Tests individual lead acid cells or monoblocs (up to 16 Volts) in any common configuration, approximately 10-6000 Ah

    Voltage: 1.5 - 20.0 Volts DC

    Conductance: 100 - 19,990 Siemens

    Test Data Storage: 500 string locations of 480 test results stored internally

    Accuracy: + 2% across test range

    Voltmeter Resolution: 5 mV User Programmable Functions: Preset values for over 250 battery types Low voltage alarm setting Low conductance warning Low conductance failure Test mode (push button/auto start)

    Calibration: Auto-calibration prior to every test, no future calibration required Connectorized Test

    Cable Options: Dual contact clamps Dual contact probes Custom cables by quotation

    Power Requirements: 7.2V, 2500AH, NiMH Internal swappable battery & charger

    Displays: LCD - FSTN 2.619 in x 1.309 in, 128 x 64 pixels, 40 degree viewing angle, contrast ratio 8, Green LED backlight

    Keypad: Stainless-steel dome, polycarbonate overlay, 1,000,000 actuations

    Data Transfer: USB, Infra-red, half-duplex IRDA protocol

    Environmental Operating Range: 0 to +40C, 95% relative humidity, non-condensing

    Storage Temperature: -20 to 82C

    Over Voltage Protection: Auto-reset disconnect Reverse polarity protected

    Housing Material: Acid resistant ABS plastic santoprene overmold

    Analyzer Dimensions: 11 in x 4 in x 3 in 280 mm x 105 mm x 80 mm

    Case Dimensions: 19 in x 15.5 in x 7 in 485 mm x 395 mm x 180 mm

    Analyzer Weight: 2.6 lb CMA-7000 Test Kit

    Shipping Weight: Approximately 11 lb