Hỗ trợ trực tuyến

Hỗ trợ trực tuyến

An Toàn, PCCC
Skype Me!
0908.994504
Điện - Viễn Thông
Skype Me!
Tel: 0906 31 64 66
Kỹ thuật
Skype Me!
Đối tác
 EARTH CLAMP TESTER 4200
EARTH CLAMP TESTER 4200
  • The earth resistance from 0.05 to 1200Ω can be measured without the auxiliary earth spikes. (The Multiple Earthing System.)
  • True RMS: Accurate true RMS readings of AC current including distorted waveform from 1mA to 30.0A
  • Noise Check Function: A function to detect current, which effects on an earth resistance measurement and display "NOISE" mark on the LCD.
  • Memory function: Save and display up to 100 measurement data.
  • Data hold function / Buzzer function / Back light function
  • Compliant with Safety Standards of IEC 61010-1 : CAT.IV 300V Pollution degree2

Giá: vui lòng liên hệ
  • Thông tin chi tiết
  • Function Range Resolution Measuring range Accuracy
    Earth resistance Auto range 20Ω 0.01Ω* 0.00~20.99Ω |±1.5%±0.05Ω
    200Ω 0.1Ω 16.0~99.9Ω |±2%±0.5Ω
    100.0~209.9Ω |±3%±2Ω
    1200Ω 160~399Ω |±5%±5Ω
    400~599Ω |±10%±10Ω
    10Ω 600~1260Ω ---
    AC current
    (50Hz / 60Hz)
    Auto range
    100mA 0.1mA 0.0~104.9mA |±2%±0.7mA
    1000mA 1mA 80~1049mA |±2%
    10A 0.01A 0.80~10.49A
    30A 0.1A 8.0~31.5A
    Operating system
    Earth resistance function : Constant voltage injection,
    Current detection,
    (Frequency : Approx.2400Hz)
    Dual Integration
    AC current function : Successive Approximation
    Over-range indication "OL" is displayed when input exceeds the upper limit of a measuring range
    Response time Approx.7 seconds (Earth resistance)
    Approx.2 seconds (AC current)
    Sample rate Approx. 1 times per second
    Power source DC6V : R6P (sizeAA manganese battery) × 4pcs,
    or LR6 (sizeAA alkaline battery) × 4pcs
    Current consumption Approx. 50mA (max. 100mA)
    Measurement time Approx. 12 hours (when R6P is used)
    Approx. 24 hours (when LR6 is used)
    Auto power-off Turns power off about 10 minutes after the last button operation.
    Applicable standards IEC 61010-1 : 2001 (CAT.IV 300V Pollution degree2)
    Withstand voltage AC5320Vrms / 5 seconds
    Between the Transformer jaws fitted parts and Case enclosure
    (except for jaws)
    Conductor size Approx. 32mm max.
    Dimension 246(L) × 120(W) × 54(D)mm
    Weight Approx. 780g (including batteries)
    Accessories Battery R6P : 4pcs Instruction manual : 1pc
    8304 (Resister for operation check : 1pc)
    9128 (Hard case : 1pc)
    •Crest factor < 3 (50Hz / 60Hz, peak value shall not exceed 60A)
    *4 counts or less are corrected to 0.

    DOWNLOAD CATALOG